Most bootloaders do not use hardware acceleration and cryptography.
wolfSSL’s wolfBoot is an exception.
wolfBoot can use Secure Elements, such as ATECC508A. Thanks to integration with wolfTPM, wolfBoot can also leverage TPM 2.0, such as STMicroelectronics ST33, Infineon SLB9670, Nuvoton NPC750 and other TPM modules.
Thanks to wolfSSL’s cryptographic engine, wolfBoot can take advantage of the hardware acceleration for cryptography operations of many embedded and server platforms. Here are highlights of our platforms support list:
| Manufacture Vendor | Platform |
| STMicroelectronics | STM32F1 / F2 / F4 / L1 / WB / F7 / H7
STM32L5 (with Trustzone support) |
| NXP | Kinetis K50 / K60 / K70 / K80 |
| NXP | RT 1060 with DCP support, and LPC54xxx |
| NXP | iMX6 iMX7 iMX8 with CCAM support |
| Microchip | PIC32, MX and MZ series |
| Microchip (Atmel) | SAM R21 |
| Cypress | PSoC6 |
| Texas Instruments | TM4C1294 (ARM Cortex-M4F) |
| SiFive (RISC-V) | FE310 / HiFive1 |
| Marvell (CAVIUM) | NITROX V, NITROX III |
| XILINX | Zynq UltraScale+ |
| Intel and AMD x86 | AES-NI, AVX1 / AVX2, RDRAND / RDSEED |
wolfBoot is a solution for firmware update and authentication that can take advantage of your platform’s hardware acceleration and cryptography. This way we achieve a small memory footprint and high performance during secure updates over the air(OTA).
If you have any questions or run into any issues, contact us at facts@wolfssl.com, or call us at +1 425 245 8247.