Hi,
I'm implementing wolfboot on an STM32F1xx chip and I need to have NVM_FLASH_WRITEONCE set on. I've arranged the partitions as follows:
WOLFBOOT_PARTITION_BOOT_ADDRESS = 0x8003800
WOLFBOOT_PARTITION_UPDATE_ADDRESS = 0x8011800
WOLFBOOT_PARTITION_SIZE = 0xE000 (=56k)
FLASH_PAGE_SIZE = 0x400 (=1k)
WOLFBOOT_SECTOR_SIZE = 0x400 (=1k)

I've written the appropriate HAL functions for write and erase, etc.

The problem I'm having is that when I call wolfBoot_success(), it does not set the sector flags at the end of the boot partition as expected.

I can step it through and see it call wolfBoot_set_partition_state() in libwolfboot.c, then call set_partition_magic(). This works and I can see the flash is now programmed with "BOOT" at address 0x80117FC to 0x80117FF (ie. the end of the boot partition, as expected).

Then "state = get_partition_state(part);" is called, which erases the page that it just programmed. If I step through get_partition_state() I can see it ultimately calls nvm_select_fresh_sector() and it's in here that it erases the same flash page that it just programmed.

In nvm_select_fresh_sector(), this code:

    /* Erase the non-selected partition */
    addr_align = (uint32_t)(base - ((!sel) * WOLFBOOT_SECTOR_SIZE))
        & (~(NVM_CACHE_SIZE - 1));
    if (*((uint32_t*)(addr_align + WOLFBOOT_SECTOR_SIZE - sizeof(uint32_t)))
            != FLASH_WORD_ERASED) {
        hal_flash_erase(addr_align, WOLFBOOT_SECTOR_SIZE);
    }

Seems to want to erase the wrong page:
If "sel == 0", then:
addr_align = 0x8011800 - (1 * 0x400) = 0x8011400. So this will erase 0x8011400 to 0x80117FF.
If "sel == 1", then:
addr_align = 0x8011800 - (0 * 0x400) = 0x8011800. So this will erase 0x8011800 to 0x8011BFF.
This is outside the boot partition (ie. it's the start of 'update' partition).

How is this supposed to work? Have I got some configuration wrong somewhere?

Thanks,
Gareth.